Jan 6 2014
This is a 10mm 1 gram flash insert. This is what I use in timed report can shells. The tubes are hand rolled craft paper, ID – 6mm OD – 10mm Wall – 2mm Length – 55mm Clay plug – 10mm I plug the bottom with 10mm of clay then add my flash 1gram […]
Dec 31 2013
Flash powder is volatile and can cause serious injury or death. This is how I mix large amounts of flash, In the video I only had aluminium in the tub to show how it folds. I always do this out side away from people. I have been using this method of mixing flash for […]
Dec 13 2013
I bought 3 of these USB 3D sound card’s for a wireless music streaming router I am working on. I plugged one in and it was running in seconds, the first thing I noticed was how bad it sounded then my earphones got hot. I looked at the voltage output on the left and […]
Dec 5 2013
Testing BP on Rice Krispies. I used a 1:5 Ratio. 1 part Rice Krispies, 5 part BP. Tested 2.5 Grams in a small tube. Works well as break.
Nov 8 2013
This year I wanted a slow start and build to total carnage in the sky. Everything in this video was purchased from Great Northern Fireworks, except for a homemade 12 shot fan cake. ~~Fire order~~ THE TEMPEST – 36 Shots TWILIGHT ZONE – 25 shots BIRD OF PREY – 25 Shots (Angled) BIRD OF […]
Nov 6 2013
6 x Kingsize Rockets (Crown Collection) in memory of Steve Button from Great Northern Fireworks.
Oct 25 2013
The eMatches and Talons were purchased from http://www.pirotechnika.info I have done a few test with them. How fast will they ignite How much current do they take to ignite Take a look at them under the microscope High speed recording (120FPS + 3x Slow motion) I tested 5 of each eMatch and Talon. eMatch 12v was applied […]
Oct 16 2013
This is my first order from http://www.pirotechnika.info and I have to admit I was unsure if I should order or not. I have made many orders from several pyro sites over the years and have mixed experiences. I first contacted Dawid at pirotechnika to enquire about shipping costs for my order, I received a response within the hour and […]
Jan 7 2014
Spolette #1
I make my spolette’s with the same tubes I make for my 10mm Flash insert’s. I add small increments of 4FA/7FA Black powder and ram, I keep increments and ramming the same each time, this way I get a consistent grain throughout. The burn rate is 1 second per cm. This is perfect for […]